Select your vehicle

DV8 Offroad Rear Bumper – RBDR1-01

DV8 Offroad

Shop Ram 1500 Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Textured black steel rear bumper
  • 3/16 inch steel reinforced with 1/4 inch steel in key areas
  • Two-step powder coat with a corrosion-resistant base
  • Direct fit for Ram 1500

Description

Overview

The DV8 Offroad rear bumper, part RBDR1-01, is a textured black steel rear bumper for the Ram 1500. It fits the 2010 Ram 1500 and the 2011–2018 Ram 1500.

It is designed for 13-15 Ram 1500 trucks. Confirm fit for your vehicle’s year, model and trim before ordering.

The bumper is made from high tensile strength 3/16 inch steel, reinforced with 1/4 inch steel in key areas. DV8 applies a two-step powder coat: a corrosion-resistant compound first, then a textured black, UV resistant and scratch resistant finish.

Key features

  • 3/16 inch steel reinforced with 1/4 inch steel in key areas
  • Two-step powder coat with a corrosion-resistant base
  • Textured black, UV resistant and scratch resistant finish
  • Rear position

Protecting the finish

A two-step powder coat is only as good as the surface it covers, and rear bumpers take stone chips and road spray at the bottom edges more than anywhere else. Small chips that reach bare metal should be cleaned, dried and touched up with a matching rust-inhibiting paint before moisture gets under the coating. Regular washing that removes salt and mud helps the finish last, and harsh solvents or abrasive pads should be avoided.

A steel rear bumper also carries the weight of the spare tire, the hitch and any recovery gear, so the mounting bolts and brackets deserve a periodic look. Check for bolts that have loosened, brackets that have shifted and welds that show hairline cracks. Address any damage early, because a bumper that flexes under load can work its fasteners loose faster than expected.

  • Touch up chips down to bare steel promptly
  • Wash off road salt and mud regularly
  • Re-torque mounting bolts after the first few trail outings

Specifications

Brand DV8 Offroad
Part number RBDR1-01
Position Rear
Material High tensile strength steel, 3/16 inch with 1/4 inch reinforcement
Finish Textured black, two-step powder coat
Fit style Direct fit

Vehicle fitment

It fits the 2010 Ram 1500 and the 2011–2018 Ram 1500.

Ram 2500 and 3500 models are not a fit for this bumper. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Dodge Ram 15002010Laramie, SLT, ST, Sport, TRX, TRX4
Ram 15002011–2018Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman, Tradesman HD

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is RBDR1-01 only for 2013 to 2015 Ram 1500s?

It is designed for 13-15 Ram 1500 trucks, and it fits the 2010 and 2011–2018 Ram 1500 models. Confirm your model year before installing.

Does it fit a Ram 2500?

No. It fits Ram 1500 models only, so Ram 2500 and 3500 trucks are not a fit. Check your vehicle's year, model and trim before choosing this bumper.

What steel does it use?

DV8 uses high tensile strength 3/16 inch steel, with 1/4 inch steel reinforcement in key areas. The finish is textured black, UV resistant and scratch resistant.

Can the bumper be repainted to match the truck?

Yes, steel bumpers can be repainted, though the powder coat should be scuffed and primed first so the new paint bonds. Use a paint designed for steel and allow it to cure fully before the bumper sees heavy use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 1500 Bumpers on Amazon