Overview
The DV8 Offroad ABBR-01 is an adaptive cruise control relocation bracket for the 2021–2026 Ford Bronco. It moves the adaptive cruise control sensor module so that it keeps working when an aftermarket bumper is fitted.
The bracket is steel with a two-stage micro-texture powder coat finish. It moves the sensor module to a new position for better clearance and operation.
Key features
- Relocates the adaptive cruise control sensor module
- Keeps the module working with most aftermarket bumpers
- Steel construction
- Two-stage micro-texture powder coat finish
Wiring and bumper clearance
A sensor relocation bracket moves the adaptive cruise control module to a new spot, so the sensor’s view of the road is part of the setup. The module needs a clear field ahead, free of paint, mud, stickers and bumper trim. Any change in height or angle can affect how the system reads traffic, so check the position once the bumper is in place.
Moving the module also changes how the wiring runs. Confirm the harness reaches the new position without tension, and secure it so it cannot rub on the frame or a bumper edge. Route the cable away from heat sources and moving parts, and use the existing connectors rather than splicing new wire.
- Clean the sensor face before mounting the bracket
- Check harness reach with the bumper held in place
- Secure cable runs with clips rated for the job
- Test the system at low speed in a clear area
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | DV8ABBR-01 |
| Type | Adaptive cruise control relocation bracket |
| Material | Steel |
| Finish | Two-stage micro-texture powder coat |
| Fitment type | Direct fit |
Vehicle fitment
The fitment data covers the 2021–2026 Ford Bronco in its Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak versions, in 2-door and 4-door form.
Trucks with non-adaptive cruise control use a different setup, so confirm which cruise control system your truck has before ordering.
Installation notes
The bracket moves the sensor module to a new position, so confirm that the module’s wiring reaches it before the aftermarket bumper is fitted.













