Overview
The Rubicon Express Transfer Case Skid Plate, part number REA1022 (R/EREA1022), is a 3/16″ steel transfer case skid for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator (JT).
The plate mounts high and tight to protect the transfer case without affecting ground clearance. Transfer case fluid can be changed without removing the plate. It works with Rubicon Express Long Arm and Short Arm Suspension Systems and fits 3.6L engine models only.
Key features
- Transfer case skid plate for the Wrangler JL and Gladiator JT
- 3/16″ steel construction
- Precision CNC laser cut and formed
- Transfer case fluid can be changed without removing the plate
- High, tight mounting to protect without affecting clearance
- No cutting or modification to existing components
- Designed to reduce obstacle hang-ups and improve slide over terrain
- Designed to work with Rubicon Express Long Arm and Short Arm Suspension Systems
- Black powder coat
Transfer case skid care
A transfer case skid plate takes the hits that would otherwise land on the transfer case housing, its vent and the nearby linkage when the vehicle crawls over rock or ledges. Most damage starts with glancing strikes that bend a plate edge or loosen a mounting bolt, so a quick look after each trail day is worthwhile.
Bolts can back out under vibration, so retighten them to the values in the installation instructions after the first few outings. Keep the fill and drain plugs clear of mud and debris before any fluid service, and check that the plate still sits flat against the housing.
- Look for fresh dents or bends after rock sections
- Check mounting fasteners for looseness
- Inspect powder coat for chips that can start rust
- Confirm the plate clears the shift linkage after a repair
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EREA1022 |
| Product type | Transfer case skid plate |
| Material | Steel, 3/16″ thick |
| Manufacturing | Precision CNC laser cut and formed |
| Finish | Black powder coat |
| Position | Transfer case |
| Engine | 3.6L engine models only |
| Body style note | 18-Current Wrangler JL, 4-Door (per manufacturer feature list) |
| Fitment type | Direct fit |
Vehicle fitment
It is a transfer case skid plate for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator (JT). Its fit is limited to 3.6L engine models, so confirm the engine before ordering.
It fits 4-door Wrangler JL models from 2018 onward with the 3.6L engine. The JK, TJ and YJ generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate needs no cutting or modification to existing components, and the transfer case fluid can be changed without removing it. Confirm the engine is a 3.6L before ordering.
What’s included
Check the package contents against your installation before starting.









