Overview
The Fishbone Offroad FB23176 is a black powder coated steel skid plate made for the Fishbone Mako Front Bumper (FB22090) on the 2018–2022 Jeep Wrangler (JL) and 2020–2022 Jeep Gladiator.
The plate protects the front axle disconnect and sway bar. It is designed as an addition to the Mako Front Bumper, so it suits owners who already run that bumper or are fitting it.
Fishbone Offroad designed this plate as an accessory for its Mako Front Bumper, part number FB22090. It shields the front axle disconnect and sway bar, which sit low behind the bumper on the JL and Gladiator. The plate is black powder coated steel, and it needs no modification to join the Mako bumper. It is not meant for other bumpers, so owners running a different brand should look elsewhere.
Key features
- Protects the front axle disconnect and sway bar
- Black powder coat steel
- No need to modify the plate or the Mako Front Bumper
- Installation is designed to be straightforward.
- No cutting or drilling required
- Designed as an addition to the Mako Front Bumper (FB22090)
Skid plate basics
A skid plate sits under the front of the vehicle to take hits from rocks, stumps and ledges that would otherwise reach the components beneath. Plates work best when they are mounted solidly, since loose hardware lets them rattle or shift on rough trails. Check the mounting bolts after the first few trail runs and again after each season of hard use.
When a plate is paired with a bumper, the two should be treated as one assembly. Look for wear where the plate meets the bumper and frame, and check for scrapes that may point to a bend. Keep the powder coat intact on steel parts and touch up small chips to slow rust. Confirm clearance for steering and the front axle through full articulation before heavy trail use.
- Torque mounting hardware after first trail runs
- Touch up chips in the powder coat
- Check for bends after a hard strike
Specifications
| Brand | Fishbone Offroad |
|---|---|
| Part number | FB23176 |
| Product type | Front bumper skid plate |
| Material | Steel |
| Finish | Black powder coat |
| Companion part | Mako Front Bumper (FB22090) |
| Installation | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2022 Jeep Gladiator and 2018–2022 Jeep Wrangler (JL).
It fits the Gladiator for 2020–2022 and the JL Wrangler for 2018–2022, in trims including Rubicon, Sport, Sport S and Unlimited four-door models. Since it is an accessory for one specific bumper, confirm the bumper first before choosing the plate.
It fits the 2020–2022 Gladiator and the 2018–2022 Wrangler (JL). Match your year, model and trim to the fitment before ordering.
Installation notes
The plate is made for the Mako bumper FB22090 and needs no modification to the plate or the bumper. No cutting or drilling is required, and it is not a general-purpose skid plate.
What’s included
Not included: The Mako Front Bumper (FB22090).
