Overview
The DrawTite Class III/IV Max-Frame trailer hitch, part number 75699, is a rear receiver hitch with a 2-inch square receiver opening. It is rated for up to 5,000 lbs. gross trailer weight (GTW) with weight carrying and up to 7,500 lbs. GTW with weight distributing, and it attaches at all frame attachment points.
DrawTite builds each hitch for a specific vehicle application, using all welded construction and no adapters. The company says every hitch carries a nationwide lifetime warranty. This hitch does not fit with a roll pan.
Key features
- All welded, solid construction
- Attaches at every frame attachment point
- Custom built for each vehicle application
- No drilling required for installation
- Up to 5,000 lbs. GTW rating for weight carrying
- Up to 7,500 lbs. GTW rating for weight distributing
- Does not fit with a roll pan
Fitting a Max-Frame hitch
A frame-mounted receiver hitch carries load through the vehicle’s frame, so the frame’s condition matters as much as the hitch rating. Before fitting, inspect the frame rails and mounting points for rust, cracks or previous repairs. Hardware is often replaced along with the hitch, so check bolt condition when fitting a new one.
Weight ratings depend on the whole towing setup. The vehicle’s towing capacity, the trailer’s gross weight, tongue weight and brakes all need to be matched. Weight distributing setups use spring bars and sway control, which add stress to the hitch and vehicle, so use the rating appropriate to your equipment and inspect the hitch after the first few loaded trips.
- Inspect frame attachment points before installation
- Match the hitch to your towing setup
- Check bolts and welds after the first loaded trips
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75699 |
| UPC | 742512756999 |
| Weight class | Class III/IV |
| Mounting position | Rear |
| Receiver opening | 2 in square |
| Attachment | All frame attachment points |
| Construction | Solid, all-welded |
| Weight carrying | Up to 5,000 lbs. GTW |
| Weight distributing | Up to 7,500 lbs. GTW |
| Roll pan fit | Does not fit with roll pan |
Vehicle fitment
The hitch is built for specific vehicle applications. Verify your vehicle’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is stated to require no drilling. Because the hitch is custom built for a specific application, confirm the application matches your vehicle before fitting it.
What’s included
The hitch is described alone, with no included hardware or accessories named.









