Overview
The Crown Automotive 53004722 is a valve cover grommet for 2.5L EFI engines with a 2.2mm inner diameter, and it also fits 4.0L engines. It fits Cherokee XJ, Comanche, Wagoneer SJ and Wrangler YJ models from 1987 to 1993.
The 2.2mm inner diameter is matched to the 2.5L EFI engine, so confirm both the diameter and engine type against your own before ordering.
Key features
- Made for 2.5L EFI engines with a 2.2mm inner diameter
- Also made for 4.0L engines
- Direct fit listed by Crown Automotive
- Replacement part for Jeep vehicles
Matching the opening to the engine
Fuel-injected engines and carbureted engines can use different covers and grommets, so the engine type matters as much as the size. Measure the inner diameter of the old grommet or the cover opening with calipers, then compare that figure before buying. A grommet that is too tight can deform, while one that is too loose lets oil escape around the cover.
When replacing the grommet, also check the PCV hose connection and the cover’s bolt holes, since loose fittings can cause the same oil residue. Clean the cover face with a solvent that leaves no film, and let it dry before setting the grommet in place. Recheck the cover fasteners after the first warm-up.
- Confirm engine type before comparing diameters
- Check the PCV hose for cracks
- Replace the cover gasket with the grommet if worn
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53004722 |
| UPC | 848399017489 |
| Part type | Valve cover grommet |
| Engine | 2.5L EFI and 4.0L |
| Inner diameter | 2.2mm |
| Fit type | Direct fit, per manufacturer |
Vehicle fitment
Listed models: Cherokee XJ and Wrangler YJ from 1987 to 1993, Comanche from 1987 to 1992, and Wagoneer SJ from 1987 to 1990.
Wrangler TJ models and years after 1993 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item described is a grommet under part number 53004722.
