Overview
The Crown Automotive 2946079 is a valve cover grommet with a .94 in inner diameter, offered as a replacement for Jeep valve covers. A grommet fills the hole in the valve cover so oil and vapor do not escape around the opening.
Crown Automotive makes replacement parts for Jeep vehicles, and this grommet is one of its valve cover grommet part numbers. Measure the hole in your valve cover to match the .94 in ID before installing.
Key features
- Inner diameter of .94 in
- Replacement valve cover grommet for Jeep vehicles
- Crown Automotive part number 2946079
- It is a direct fit.
Grommet fit and sealing
A valve cover grommet sits in the cover opening and seals the gap around the oil fill or breather. It keeps oil and vapor from escaping and helps the cover stay tight. Because it is a small seal, it can harden or flatten over time, especially near hot engine areas.
Before buying, measure the hole in the cover. The inner diameter of the grommet should match the opening so it seats without stretching or leaving gaps. Clean the area around the hole, check the grommet for cracks, and seat it evenly. If it is loose or misshapen, replace it before the cover goes back on, since leaks around the opening are hard to spot.
- Measure the cover hole before ordering
- Clean the seat area before installing
- Look for cracks or hardening
- Replace the grommet with the cover if it is worn
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 2946079 |
| UPC | 848399002522 |
| Inner diameter | .94 in |
| Fitment | Direct Fit |
Vehicle fitment
No vehicle years or models are named for this grommet, and the only fitment stated is Direct Fit. Use the valve cover you are replacing to confirm the grommet suits your engine.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one valve cover grommet. Count the grommets against what your valve cover needs before starting the job.
