Overview
The Dana Spicer differential bearing overhaul kit, part number 2017106, is a bearing kit for the differential, grouped under ring and pinion bearing kits. An overhaul kit typically replaces the bearings during a rebuild.
This is a direct fit bearing kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Planning a bearing rebuild
A differential rebuild is easier when the parts are laid out and checked before any new bearing goes in. Bearings, races, seals, and shims all affect how the carrier turns and meshes, so each part should be inspected rather than assumed good. Clean housings and mating surfaces help the new parts seat correctly.
Preload and gear mesh are set after the bearings are installed, and that work needs the right tools and some patience. Record shim thickness during disassembly so you have a reference. Check the carrier and pinion for wear, since worn gears can damage new bearings quickly. Replace seals that were removed, and check the gear oil for metal flakes that could signal wear elsewhere in the axle.
- Label shims as they come out
- Clean the housing before assembly
- Check gear oil for debris
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2017106 |
| UPC | 700007783731 |
| Kit type | Differential bearing overhaul kit |
Installation notes
Differential bearing work sets preload and gear mesh, so a technician with the right tools should set them up after the bearings are replaced. Confirm the bearing sizes match your housing before starting.
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and match the bearing sizes to your housing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the bearings, races, seals and shims against your installation before starting.









