Overview
Fluorescent green is the color of Daystar’s KU70056FG D-Ring Isolator, a polyurethane cover that fits any standard 3/4 inch D-ring or shackle. Once it is seated, it stops the shackle from tapping the bumper or other recovery points while the vehicle moves, and it guards the finish where the D-ring contacts the vehicle.
A bright finish makes the isolator easy to spot on a dark trail or during a night recovery. The pack contains a pair, so the green finish can cover two recovery points on one rig. The isolator is universal fit and is not built around a single make, model or year.
Daystar offers this isolator in several other colors, so the fluorescent green version is one choice within a wider family of the same part.
Key features
- Fluorescent green polyurethane isolator for standard 3/4 inch D-rings and shackles
- Quiets the rattle a D-ring makes against the bumper
- Protects anchor points and bumper paint from D-ring scratches
- Installs by snapping over the shackle and comes off the same way
- Comes as a pair
- Limited lifetime warranty
Visibility and recovery gear
Bright colors make recovery gear easier to find when light is poor, so a fluorescent sleeve can help you locate the shackle and its anchor point during a night pull. The color is a finish choice and does not change how the polyurethane cushions the shackle against the bumper, so the sleeve performs the same as any other color.
Keep the sleeve clean so the finish stays bright and grit does not wear the surface. After rough use, look for cracks, tears or flattened spots, and replace the sleeve if the cushioning has been lost. Store spare sleeves away from direct sun to keep the color and material in good condition.
- Clean the isolator to keep the color bright
- Store spare sleeves away from direct sun
- Keep the shackle pin tight and secure
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056FG |
| UPC | 618089004750 |
| Color | Fluorescent Green |
| Material | Polyurethane |
| Fits | Standard 3/4 inch D-rings or shackles |
| Quantity | Pair |
| Warranty | Limited lifetime |
Vehicle fitment
The isolator is universal and is not designed for one make, model or year. It fits a standard 3/4 inch D-ring or shackle, so confirm that size first. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the isolator sits flush on the shackle body before a recovery pull, and recheck the seating if the shackle is moved to a different recovery point.
What’s included
A pair of fluorescent green D-Ring Isolators.
Not included: D-rings, shackles and recovery straps.









