Overview
The Dana Spicer 706988X is a differential bearing set for the rear Dana 44 axle used on the 1999–2004 Jeep Grand Cherokee (WJ). The set includes two tapered roller bearings and two races, made of steel.
Parts from Dana Spicer’s genuine light vehicle axle line are built to original equipment standards. The fit covers Laredo, Limited, Overland, Special Edition and Sport trims of the 1999–2004 Grand Cherokee WJ.
Key features
- Two tapered roller bearings and two races included
- Built for the rear Dana 44 axle
- Steel construction
- Installs in the rear position.
Setting up a Dana 44 carrier
A bearing set for a differential carrier controls how the pinion and ring gears sit, and small changes in preload or shim position can cause noise or early wear. Before installation, clean the carrier bore, check the bearing seats for scoring, and confirm that the cups fit squarely. Gear lash and pattern should be checked after assembly.
Tapered roller bearings need a light, even preload rather than a tight clamp, so they are usually set with a preload gauge or by experienced technicians. Gear oil should be fresh and the correct type for the axle. Lubricant that smells burnt or carries metal points to damage that should be found before reassembly.
- Clean carrier bore and bearing seats
- Check cup seating and shim position
- Inspect gears for pitting before reuse
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S706988X |
| Position | Rear |
| Axle | Dana 44 rear |
| Design | Tapered roller bearing |
| Included | 2 bearings and 2 races |
| Material | Steel |
| Cone bore | 1.781 in |
| Cone length | 0.781 in |
| Cup length | 0.656 in |
| Cup outside diameter | 3.0625 in |
| Housing bore | 3.0625 in |
| Width | 0.843 in |
Vehicle fitment
It fits the 1999–2004 Jeep Grand Cherokee WJ in the Laredo, Limited, Overland, Special Edition and Sport trims, with a rear Dana 44 axle.
The list does not include the 2005–2008 Grand Cherokee (WK), the 1996–1998 Grand Cherokee (ZJ) or any Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearing preload and carrier setup are part of this job, so a technician familiar with Dana 44 rear axles should install the set. Support the vehicle securely on stands while working under it.
What’s included
Two bearings and two races are included.
Not included: the differential carrier, ring and pinion gears, and axle seals are not part of this set.












