Overview
The Crown Automotive Dana 30/35/44 Pinion Bearing Shim Kit, part number CRO4856369, is a set of pinion shims used to set pinion depth and bearing preload in Dana 30, 35 and 44 axles. It fits Jeep Grand Cherokee WJ, WK and ZJ, Liberty KK and Wrangler JK models.
Shims like these are chosen during gear setup, so the thickness you need depends on your existing pinion setup rather than a bolt-on fit.
Key features
- Replacement shim kit for Dana 30, 35 and 44 pinion bearing setups
- Shim sizes listed from .040 to .044
- Crown Automotive part number CRO4856369
Setting pinion depth
Pinion depth is the distance the pinion gear sits into the ring gear, and it is set with shims behind the pinion bearing cup. Getting it right affects tooth contact, noise and bearing life. A shim change moves the pinion only slightly, so measure the existing setup carefully and change one variable at a time when testing contact. Shim packs come in thickness steps, so having a spare or two on hand helps refine the setup.
Bearing preload is set alongside depth. Too little preload lets the pinion move and wear the bearings, and too much causes heat and early failure. Check preload with the correct tool and the axle’s procedure before final assembly. Keep the old shims together, since they show what the previous setup used.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO4856369 |
| Axle types | Dana 30, Dana 35 and Dana 44 |
| Shim sizes | .040 to .044 |
Vehicle fitment
Fits the 1994–1998 Jeep Grand Cherokee (ZJ), 1999–2004 Grand Cherokee (WJ), 2005–2008 Grand Cherokee (WK), 2008–2012 Jeep Liberty (KK) and 2007–2018 Jeep Wrangler (JK), with trims covered for each model.
Models outside that list, such as the Liberty KJ, the Wrangler TJ and the Wrangler JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion shims are set during gear setup, and bearing preload should be checked against the specification for your axle before final assembly.
What’s included
Confirm the number of shims in the kit before ordering.









