Overview
The Dana Spicer 701129X is a clutch set for the Power-Loc limited slip in a rear Dana 80 axle. Replacing the clutches inside a limited slip restores the preload that gives the unit its grip, which is how it performed when new from the factory.
Many Power-Loc units can be built with different clutch setups for a more aggressive feel. The set is matched by axle type, so the rear Dana 80 axle is the key fit check rather than a vehicle model.
Key features
- Replacing the clutches restores limited slip preload
- Designed for the Power-Loc limited slip
- Rear Dana 80 axle position
- Clutch setups can vary between units.
Limited slip care
A Power-Loc limited slip relies on clutch preload to send torque to both wheels, so the clutch stack and its spring pressure both matter. When clutches wear, the unit can chatter or lose grip, which is why many owners rebuild it during a differential service. Clean all parts and keep the clutch surfaces free of contamination during assembly.
Limited slip units need the correct lubricant to work properly, and friction-modified fluid is commonly used in clutch-type designs. Check the fluid level and condition at service intervals, and change it when it looks dirty or smells burnt. Stop using the axle if the unit chatters hard, and inspect the clutches before further driving.
- Clean clutch surfaces during assembly
- Use the lubricant your axle requires
- Inspect for chatter or lost grip
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 701129X |
| Axle location | Rear |
| Axle type | Dana 80 |
| Differential type | Power-Loc limited slip |
| Fitment | Universal fit, by axle type |
Vehicle fitment
Fitment is by axle: the rear Dana 80 with a Power-Loc limited slip. No vehicle year, make, model or trim is named, so confirm the axle before installing the clutches.
No other axles or vehicles are named for this clutch set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clutch replacement means opening the differential, so the preload set on reassembly decides how the unit grips. Check preload against the service specifications for your unit.
What’s included
Clutches for a Power-Loc limited slip in a rear Dana 80 axle. Check the number of clutch plates against your unit during the rebuild.
Not included: the carrier, gears and axle housing.








