Overview
It is a Trac-Loc clutch pack for the Dana 35 axle, for front or rear location. It restores the preload of a Trac-Loc limited slip so the unit locks as it did when new.
Many units run different clutch setups, and changing the arrangement can produce a more aggressive lock than stock.
Key features
- Trac-Loc clutch pack for Dana 35 axles
- Fits both front and rear axle locations.
- Restores preload for a limited slip that locks like new
- Part number 706962X from Dana Spicer
Before reassembly
Start by confirming the axle is a Dana 35 and recording whether the unit sits in the front or the rear position. The clutch stack has to match the housing and the carrier, so a pack that fits the axle type can still need careful setup. Clean the case and check the clutch seats for scoring before the new pack goes in.
Set preload only after the unit is fully assembled, since the feel changes once the carrier is in place. Lubricate the clutches as the rebuild calls for and keep debris out from between the plates. After the unit is back in service, pay attention to how it locks in tight turns and on low traction surfaces, and recheck preload if the feel changes.
- Clean the case and clutch seats before assembly
- Record the axle position before disassembly
- Recheck preload if lock feel changes after installation
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706962X |
| Axle type | Dana 35 |
| Axle location | Front or rear |
| Differential type | Trac-Loc limited slip |
| Part type | Clutch pack |
Vehicle fitment
No vehicle years, makes or models are named for this clutch pack. The axle type is Dana 35, so confirm the axle and its position before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because preload controls how firmly the unit locks, check it after the clutches are in and before the unit goes back into service.
What’s included
One clutch pack for the Dana 35 Trac-Loc, as titled.
Not included: the rest of the differential and axle hardware needed to finish a rebuild.








