Overview
The Dana Spicer 706039X is a Dana 60 limited slip differential carrier case for rear axles, sold as an empty case with no gears. It suits a rebuild where the ring gear landing has to change and the factory Trac-Lok carrier is not being reused.
The axle type is Dana 60 and the axle location is rear. It is universal fit, so match it to the Dana 60 axle housing before fitting.
Key features
- Empty differential carrier case, limited slip case only
- Built for rear Dana 60 axles
- Different ring gear landing option for gear changes
- Dana Spicer O.E. carrier case
Ring gear landing basics
The ring gear landing is the flange surface where the ring gear bolts to the carrier case, so a change in landing usually means the carrier must be replaced rather than modified. Mismatched landings can cause the ring gear to run out of true, which leads to noise and early tooth wear. Because the bolt pattern and face location differ between designs, the housing and ring gear should be checked together before any parts are ordered.
Trac-Loc carriers use clutch packs to limit wheel spin, so the clutch discs and side gears are often inspected while the case is open. Worn clutch material or a scored case bore should be corrected during the same rebuild. Pinion and carrier bearings are commonly replaced together when the gears change, since reusing aged bearings can undo the alignment achieved during setup.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706039X |
| UPC | 725975983126 |
| Axle type | Dana 60 |
| Axle location | Rear |
| Axle spline | Empty case |
| Differential type | Limited slip differential case only |
Vehicle fitment
This carrier case is not vehicle-specific. Dana Spicer marks it as universal fit by axle, for the Dana 60 rear axle. The product lists no vehicle years, makes or models, so check the housing and ring gear landing against your axle first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The case is empty, so ring gear, pinion and bearing setup must be done separately, and gear set-up needs a professional.
What’s included
The empty limited slip differential carrier case only.
Not included: ring gear, pinion and bearings.









