Select your vehicle

Rigid Industries 360-Series PRO SAE Fog Light Kit (White) – 36120

Rigid Industries

$479.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 7:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rigid Industries 360-Series PRO SAE fog light kit, white, part number 36120
  • 3100 lumens, 2.14 amps, 50,000 hour LED life
  • SAE J583 compliant for street use
  • Universal fit

Description

Overview

The Rigid Industries 360-Series PRO SAE Fog Light Kit (White), part number 36120, is an SAE compliant white LED fog light kit. It was developed for dust, fog and other low-visibility conditions while being legal for use on the street.

It produces 3100 lumens, draws 2.14 amps and is rated for 50,000 hours of LED life. The lights meet SAE J583 and use a long range, high intensity beam.

Key features

  • SAE J583 compliant white LED fog lights
  • 3100 lumens
  • 2.14 amps draw
  • 50,000 hour LED life
  • Long range, high intensity beam
  • Developed for low-visibility conditions

Wiring and relay sizing

Lights that draw a few amps should not run straight from a dash switch. A relay sends the current through a heavy-gauge circuit while the switch carries only the small control signal, which keeps the switch cooler and the wiring safer. Fuse the feed close to the battery and route the wire away from moving parts and hot exhaust areas.

LED fog lights hold their output for a long time, but the driver and connections still need clean, tight joints. Check the ground point for paint or rust before final mounting, and seal splices with heat-shrink tubing. Aim the lights low after mounting so the beam stays under the fog layer and does not glare into oncoming traffic. Re-check the aim after the first few rough drives.

  • Fuse the feed close to the battery
  • Use a clean, bare-metal ground
  • Seal splices against moisture

Specifications

Brand Rigid Industries
Part number 36120
Light series 360-Series
Light color White
Beam pattern SAE
Lumens 3100
Amps 2.14
LED life 50,000 hours
Compliance SAE J583

Vehicle fitment

Universal fit. These lights are not tied to a vehicle, so the mounting spot and wiring decide the placement.

Check the mount and the wiring before ordering to confirm the placement suits your vehicle.

Installation notes

Use a relay and a switch that suit the 2.14 amp draw, and aim the lights low for fog use after mounting.

What’s included

The 360-Series PRO SAE white fog light kit.

Questions & Answers

Are the Rigid 36120 fog lights street legal?

Yes. They meet SAE J583 and are built for street use, so they suit on-road driving where local rules allow. Confirm local rules before fitting them to a vehicle used on public roads.

How much current do the Rigid 36120 lights draw?

They draw 2.14 amps, so the relay and switch need to suit that load. The LED life is rated at 50,000 hours, and these white 360-Series lights are built for long service.

How bright are the Rigid 36120 fog lights?

They put out 3100 lumens with a long range, high intensity beam. That output suits dust, fog and other low-visibility conditions when the lights are aimed low.

Why use a relay for LED fog lights?

A relay carries the full current through its own circuit, so the dash switch only handles a small control signal. That protects the switch and wiring over time and keeps the connections cooler.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon