Select your vehicle

Curt Manufacturing Wiring T-Connectors – 56141

Curt Manufacturing

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2011–2012 Nissan Pathfinder (LE, S, SV, Silver Edition)
  • 2-wire wiring T-connector, part number CRT56141
  • Plugs into the factory harness with a 4-pin connector
  • Listed install time of 5 minutes

Description

Overview

The Curt Manufacturing CRT56141 is a 2-wire wiring T-connector for the 2011–2012 Nissan Pathfinder in LE, S, SV and Silver Edition trims. It plugs into the factory harness and comes with a 4-pin connector. The install time is 5 minutes.

Key features

  • 2-wire system
  • Plugs into the factory harness
  • 4-pin connector with dust cap
  • Ground wire with self-tapping screw
  • Install time listed at 5 minutes

Choosing between T-connectors and splices

A T-connector gives you a plug-in point on the existing harness, which is generally easier to undo than cutting and splicing wires. Because the connection can be unplugged, it is simpler to return the vehicle to stock or to troubleshoot a lighting problem one circuit at a time. Splices, by contrast, are permanent and can trap moisture if the heat-shrink work is not done carefully.

Choosing a connector also means considering the wiring system. A 2-wire setup suits a basic lamp function, while a powered converter is the better choice when the lamp or trailer needs its signals conditioned. Compare the wiring layout with your existing harness, and think about any other accessories that share the same circuit before you commit to a part.

  • Plug-in connections are easier to reverse
  • Splices are permanent and need careful sealing
  • Check existing accessories sharing the circuit

Specifications

Brand Curt Manufacturing
Part number CRT56141
Wiring system 2-wire
Install time 5 min
Included 4-pin connector, dust cap, ground wire with self-tapping screw

Vehicle fitment

It fits the 2011–2012 Nissan Pathfinder in LE, S, SV and Silver Edition trims.

Pathfinder model years after 2012 are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Curt’s listing gives a 5 minute install. The ground wire is fastened with the supplied self-tapping screw.

What’s included

Supplied parts are a 4-pin connector, a dust cap and a ground wire.

Fitment

VehicleYearsTrims
Nissan Pathfinder2011–2012LE, S, SV, Silver Edition

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the Curt CRT56141 fit?

It is made for the 2011–2012 Nissan Pathfinder in LE, S, SV and Silver Edition trims. For later model years, verify your year, model and trim before installing.

Is the CRT56141 a 2-wire connector?

Yes, it is a 2-wire system. Compare that wiring layout with your existing setup before installing the connector on the factory harness.

How long does installation take for the CRT56141?

The install time is 5 minutes. The connector plugs into the factory harness, and the ground wire is fastened with the included self-tapping screw.

Will a T-connector let me reverse a wiring mistake?

Usually yes, since the plug can be disconnected and reseated. Still, label the factory harness ends before unplugging anything, and confirm each function works before reattaching the trim.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon