Overview
The Curt Manufacturing CRT51322 brake control adapter harness is a wire kit built to connect a brake controller unit through a plug-and-play operation. It is filed under Towing brake controllers and electrical and carries a Universal Fit marking.
The kit is useful for brake controller installs where working out each wire’s job is the main concern. It identifies which wire goes where.
Key features
- Plug-and-play connection for a brake controller unit
- Designed to show the function of each wire
- Adapter harness for brake controller wiring
- Universal Fit marking
Routing and securing the harness
Brake harnesses run from the tow vehicle cabin to the rear of the vehicle, a route that passes through tight spaces and moving parts. Use existing factory grommets where possible, and keep the wire bundle clear of the steering column, pedals and any hot exhaust surfaces. Secure the harness at regular intervals with cable ties or clips so it does not rub on the frame.
Choose a mounting spot for the controller where you can see the display while driving and reach the manual lever with ease. Test the wiring with the trailer connected before a trip, and recheck clips after the first few miles. Chafing and loose connectors are the usual causes of intermittent brake problems on towing setups.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT51322 |
| Product type | Brake control adapter harness |
| Fitment | Universal Fit |
Vehicle fitment
Fitment is not tied to a named vehicle for the CRT51322; it carries a Universal Fit marking. Suitability depends on the brake controller and tow vehicle you pair it with.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wire kit is the only item covered. Check the included wires against your brake controller’s connections before starting.
Not included: A brake controller unit is needed to use this harness and is not part of the kit.









