Select your vehicle

Curt Manufacturing Brake Control Adapter Harness – 51423

Curt Manufacturing

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Curt Manufacturing brake control adapter harness, part CRT51423
  • Plug-and-play wiring kit for brake controller units
  • Shows the function of each wire
  • Universal Fit; no specific vehicle listed

Description

Overview

Curt Manufacturing’s CRT51423 is a brake control adapter harness that wires a brake controller unit with a plug-and-play approach. It is grouped under Towing brake controllers and electrical and carries a Universal Fit marking.

The kit makes wiring a brake controller unit a simpler job, since each wire’s purpose is easier to identify.

Key features

  • Plug-and-play approach to brake controller wiring
  • Designed so each wire’s purpose is easier to identify
  • Adapter harness for brake controller units
  • Universal Fit marking

Wiring a brake controller harness

A brake control adapter harness sits between the tow vehicle’s wiring and the brake controller unit. Its job is to carry the signal and power connections without requiring you to trace each conductor by hand. Before you start, confirm that the controller you plan to use has a connector and wire arrangement that matches the harness, since the connection points vary between controller models.

Wire colors are a helpful reference, but they are not a substitute for checking each function against the controller’s own instructions. Take your time with the connections, keep the harness routed away from moving parts, and secure it with clips so it does not rub against the frame or body. Test the trailer brakes at low speed in an empty area before towing a load.

Specifications

Brand Curt Manufacturing
Part number CRT51423
Product type Brake control adapter harness
Fitment Universal Fit

Vehicle fitment

Because the CRT51423 is marked Universal Fit, no single vehicle is named. Check connector compatibility with your brake controller and the vehicle you plan to use it on.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

No separate pieces are described beyond the harness kit.

Not included: A brake controller unit, which the harness connects to but does not supply.

Questions & Answers

What part is the CRT51423?

CRT51423 is a Curt Manufacturing brake control adapter harness, a wire kit used for brake controller wiring. It is a plug-and-play design that makes each wire's function easier to identify.

Is the CRT51423 vehicle specific?

Not by its marking. It carries a Universal Fit label and names no year, make or model, so compatibility depends on your brake controller and vehicle wiring.

Does the CRT51423 come with a brake controller?

No. The product is the wire kit only. A brake controller unit is what the harness connects to, so you need one separately.

Should the harness be checked after installation?

Yes. Recheck the connections after the first few tows, since vibration can loosen clips and terminals. Look for chafed insulation, loose pins, and any heat marks near the connectors, and replace damaged sections before relying on the brakes.

Can this harness be used with a different brake controller?

Only if the connector and wire functions match. Compare the harness connector with the controller's connection points and confirm each function before wiring. If the arrangement differs, the harness may need to be replaced or the controller changed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon