Select your vehicle

Curt Manufacturing Brake Control Adapter Harness – 51455

Curt Manufacturing

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Curt Manufacturing CRT51455 brake control adapter harness
  • Plug-and-play connection for a brake controller unit
  • Wire kit that makes each wire’s job easier to identify
  • Universal Fit; no named vehicle

Description

Overview

The Curt Manufacturing CRT51455 is a brake control adapter harness in the Towing brake controllers and electrical group. It is a plug-and-play wire kit for a brake controller unit and carries a Universal Fit marking.

The kit is designed so installers can see which wire does what, which removes much of the guesswork during setup.

Key features

  • Plug-and-play wiring for brake controller units
  • Wire kit aimed at clarity for each connection
  • Adapter harness design
  • Universal Fit marking

Wiring a controller step by step

Setting up a brake controller involves more than plugging in a harness. Start by mounting the controller where you can reach its buttons and see its display while driving. Then route the harness from the tow vehicle’s connection point to the controller location, keeping it clear of exhaust heat, sharp edges, and moving suspension parts.

Once the harness is connected, test the brake output with the trailer hitched before any longer trip. Adjust the gain so the trailer brakes engage smoothly rather than locking the wheels, and recheck the setting after the first few stops. Keep a record of the setting that works for your load so it is easy to repeat.

Gain settings should be revisited whenever the trailer load changes, since a heavier load asks more of the brakes. Keep the connector dust-free and dry, because moisture is a common cause of intermittent brake output.

Specifications

Brand Curt Manufacturing
Part number CRT51455
Product type Brake control adapter harness
Fitment Universal Fit

Vehicle fitment

The harness is a Universal Fit part with no specific tow vehicle tied to it. Its suitability depends on the brake controller it pairs with.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The harness is the wire kit only, with no extra components included.

Not included: A brake controller unit is needed to use this harness and is not part of the kit.

Questions & Answers

What does the CRT51455 harness do?

It is a brake control adapter harness that connects a brake controller unit with a plug-and-play wire kit. It is designed to make clear which wire does what and where it goes during setup.

Will the CRT51455 fit my specific vehicle?

No vehicle is named for it. Curt marks the CRT51455 as Universal Fit, so check it against your brake controller and tow vehicle rather than a model year, and confirm details before ordering.

Is the brake controller included with the CRT51455?

No. The harness is the wire kit only, with no brake controller included. You need a separate brake controller unit to connect it to, and that unit is not part of this product.

How can I tell the harness connection is failing?

Watch for brake output that cuts in and out, a controller display that shows a fault, or trailer lights that flicker when the brakes are applied. Inspect the connector for corrosion or bent pins, then clean or replace it before towing.

Does a plug-and-play harness remove the need to test wiring?

No. A plug-and-play design makes identifying wires easier, but each connection still needs testing with the trailer hitched. Verify brake output at low speed in an open area before relying on the system on the road.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon