Overview
The CRT51383 from Curt Manufacturing is a brake control adapter harness, a wire kit that connects a brake controller unit with a plug-and-play design. It belongs to the Towing brake controllers and electrical range and is marked Universal Fit.
The kit answers the common question of which wire serves which function and where each one attaches.
Key features
- Plug-and-play connection for a brake controller unit
- Wire kit that identifies each wire’s function
- Brake control adapter harness format
- Universal Fit with no vehicle named
Plug-and-play wiring basics
A brake control adapter harness takes the guesswork out of connecting a brake controller to a tow vehicle. Each wire has a specific job, such as power, ground, brake output or a signal line, and mixing them up can leave the trailer brakes inactive or cause the controller to behave unpredictably. A labeled, plug-and-play kit gives you a clear reference for every connection and helps you avoid splicing into the wrong circuit.
When you install the harness, start with the battery disconnected and check that the connectors are clean and dry. Make each joint secure, cover it with heat shrink or a sealed connector, and route the harness so it cannot rub on the frame. Once everything is connected, check the controller’s power light and test the brakes in a quiet area before towing.
- Confirm the controller’s wire layout first
- Keep connectors dry and clean
- Check the harness after rough trips
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT51383 |
| Product type | Brake control adapter harness |
| Fitment | Universal Fit |
Vehicle fitment
No specific vehicle is named for the CRT51383, which carries a Universal Fit marking. Its fit depends on the brake controller and the tow vehicle wiring it is paired with.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wire kit itself is the only item included.
Not included: The brake controller unit this harness wires into.









