Overview
The CURT Grip Step, part number CRT32002, is a receiver hitch step from CURT Manufacturing with a 6-inch drop. Its 2-inch shank slides into a standard 2-inch x 2-inch receiver tube, giving you a foothold to reach the cargo area, trunk or truck bed when mounted on a rear hitch, or under-the-hood maintenance when mounted on a front mount hitch.
A receiver hitch step like this one is an add-on for a vehicle that already has a trailer hitch receiver. It attaches to the receiver itself rather than to a vehicle-specific bracket, so fit depends on whether your receiver is a 2-inch size.
Key features
- 2-inch shank for standard 2-inch x 2-inch receiver tubes
- Expanded metal treads for high traction underfoot
- Open tread design lets dirt and debris fall through, keeping the surface clean
- Powder-coated aluminum construction that resists corrosion
- Wide stepping surface measuring 26 inches x 7 inches
- Hitch pin included to secure the shank in the receiver
Choosing and using a receiver step
A receiver step is most useful when the trailer hitch is already part of your vehicle’s setup. Before buying, confirm the receiver opening, the height of the step above the ground, and how far the drop will place your foot from the bumper or bed rail. A step that sits too low can catch on curbs, while one set too high may not help much.
Expanded metal treads shed mud and snow, which keeps footing predictable. Check the connection each time you install the step, and keep the surface free of ice so the platform stays dependable in wet weather.
- Confirm receiver size before buying
- Check step height against your bumper
- Keep the tread clear of mud and ice
- Remove the step when towing if it interferes
Specifications
| Brand | CURT Manufacturing |
|---|---|
| Part number | CRT32002 |
| Product type | Receiver hitch step (Hitch Step) |
| Shank size | 2 inch |
| Receiver size | 2-inch x 2-inch receiver tube |
| Drop | 6 inch |
| Step size | 26 inches x 7 inches |
| Material | Powder-coated aluminum |
| Tread | Expanded metal |
| Mounting | Rear mount or front mount hitch |
Vehicle fitment
The step is designed for any standard 2-inch x 2-inch receiver tube, so it works on a vehicle with a 2-inch receiver, whether the receiver is on the rear or front. Vehicles without a 2-inch receiver cannot use it.
Vehicles without a 2-inch receiver cannot use this step. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Slide the 2-inch shank fully into the receiver tube and secure it with the included hitch pin. Check that the pin is fully seated before stepping on the platform, and inspect the connection before each use.
What’s included
The step comes with a hitch pin for securing the shank in the receiver.
Not included: A receiver hitch, which the step must be installed into.









