Overview
The Currie Tow Bar Mounting Kit CE-9033TJ is a mounting bracket and hardware kit for installing the Currie Enterprises CE-9033F tow bar on a TJ Wrangler or LJ Unlimited. It is sold as a kit and works with a stock bumper, a Currie Enterprises bumper or other aftermarket bumpers.
The kit includes all of the mounting brackets and hardware, along with instructions, and its slim design is made for maximum ground clearance. The tow bar itself is a separate product, so it must be purchased separately.
Key features
- Mounts the Currie Enterprises CE-9033F tow bar
- Works with stock, Currie Enterprises or other aftermarket bumpers
- Slim design for maximum ground clearance
- All necessary mounting brackets and hardware included
- Instructions included
- Sold as a kit
Towing with a bumper-mount bar
A bumper-mounted tow bar puts the load on the bumper brackets and the frame rails behind them, so the mounting points carry more force than the bumper was built for. Before towing, check that the mounting bolts are seated and that the bumper is in good condition. Look for cracks at the brackets and for any movement at the bolts after a few trips.
Towing capacity is set by the weakest part of the chain, so the tow bar, receiver, hitch and trailer should all be rated for the load. Check the vehicle’s tow rating and the trailer’s loaded weight, and keep the load within the lowest figure in that chain. Trailer brakes, tongue weight and correct hitch height matter as much as the bar itself.
A mounted bar also changes the approach and departure angles and the ground clearance at the front of the vehicle. Drive carefully over ramps and rough ground, and avoid rocks or stumps that can strike the bar. Recheck all brackets after the first few towing trips.
- Check bumper mounting bolts before towing
- Keep the load within the lowest rating in the chain
- Inspect brackets for cracks
- Confirm trailer brakes and tongue weight
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9033TJ |
| UPC | 82520700002 |
| Product type | Tow bar mounting kit |
| For tow bar | Currie Enterprises CE-9033F |
| Bumper compatibility | Stock, Currie Enterprises or other aftermarket bumpers |
| Design | Slim, for maximum ground clearance |
| Hardware and instructions | Included |
| Sold as | Kit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) Unlimited, for mounting the CE-9033F tow bar.
Other Wrangler generations, such as the YJ, JK and JL, are not covered. The kit does not include the tow bar. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the instructions included with the kit and tighten all fasteners to the torque the kit requires. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Check the tow ratings of the vehicle, receiver and trailer before towing, and follow your local towing regulations.
Confirm that the tow bar, bumper and mounting points are suitable for the intended load, and check that all brackets are secure before towing.
What’s included
All the necessary mounting brackets and hardware, with instructions, sold as a kit.
Not included: the Currie Enterprises CE-9033F tow bar and a bumper.











