Overview
The Currie Currectlync heavy-duty tie rod and drag link system is a steering upgrade for TJ, LJ, XJ and MJ Jeep vehicles. It is a direct replacement for the stock tie rod and drag link, and it includes a Currie heavy-duty steering stabilizer bracket.
The tie rod is solid alloy steel, bored and threaded on each end, and the drag link is forged alloy. The system is rated 200% stronger than stock components.
Key features
- Forged alloy drag link
- Solid alloy steel tie rod bar, bored and threaded on the ends
- 7/8 inch threaded tie rod ends with boots included
- 1-1/8 inch threaded drag link adjuster with giant clamps
- Heavy-duty steering stabilizer bracket included
Choosing steering geometry
A tie rod and drag link upgrade changes how the steering links move, so the lift height and the stock bump stops affect how the parts work. Lift changes the angle of the links, which is why the minimum bump stop and the trimming notes matter on unlifted vehicles. Before fitting, measure your current setup and confirm the steering stops at full lock without binding.
Heavier steering parts add weight to the front end, so inspect the steering stabilizer bracket, the axle mounts and the frame for wear or cracks after installation. Check the tie rod boots and clamps regularly, since dirt can work into the joints and shorten their life. Keep a record of your alignment settings so you can compare them after future work.
Specifications
| Brand | Currie |
|---|---|
| UPC | 77700700001 |
| Product line | Currectlync heavy-duty tie rod system |
| Drag link | Forged alloy |
| Tie rod bar | Solid alloy steel, bored and threaded on the ends |
| Tie rod end thread | 7/8 inch |
| Drag link adjuster thread | 1-1/8 inch |
| Chromemoly component | 1-1/4 inch |
| Strength rating | 200% stronger than stock components. |
| Designed lift | 4 inches of lift |
| Fitment | Direct Fit |
Vehicle fitment
It is designed for TJ, LJ, XJ and MJ vehicles, which are Jeep Wrangler TJ (1997–2006), Wrangler LJ (2004–2006), Cherokee XJ (1984–2001) and Comanche MJ (1986–1992) models.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for YJ, JK, JL and Grand Cherokee models.
Installation notes
The system is designed for vehicles with 4 inches of lift. With less lift, a minimum 2 inch bump stop over stock is needed. No modification or machining is required, though on unlifted vehicles two of the tie rod ends may need trimming to achieve proper adjustment.
What’s included
The kit includes the tie rod bar, the drag link, the 7/8 inch tie rod ends with boots, and the heavy-duty steering stabilizer bracket.














