Overview
The Smittybilt tow bar hardware kit is the hardware set for use with the Smittybilt tow bar, part number 87450. It includes a 2 inch coupler, two universal brackets, two lateral strut brackets, D-ring brackets and tow safety chains.
It is a hardware kit only, made to work with the Smittybilt tow bar, part number 87450. Before ordering, make sure the hardware suits your vehicle’s year, model and trim.
Key features
- 2 inch coupler
- Two universal brackets
- Two lateral strut brackets
- D-ring brackets
- Tow safety chains
Tow hardware inspection
Tow bar hardware carries the load between your vehicle and the towed vehicle, so the parts work as a system. The coupler, brackets and safety chains should be matched to the tow bar they attach to and kept in good condition. Before each trip, check that every bolt is tight and no bracket shows cracking or bending.
Safety chains should be crossed under the coupler and sized to the load, with enough slack to turn without pulling on the hitch. Coupler latches wear over time, so look for play or a loose fit on the ball. Replace worn pieces in sets rather than one at a time to keep the connection even.
- Inspect brackets for cracks and bends
- Look for wear on the coupler latch
- Keep chains off the ground when not in use
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410135978 |
| Product type | Tow bar hardware kit |
| Coupler | 2 inch |
| For use with | Smittybilt tow bar, part 87450 |
Vehicle fitment
Confirm the tow bar is part number 87450 and that the vehicle matches the tow bar before ordering.
What’s included
A 2 inch coupler, two universal brackets, two lateral strut brackets, D-ring brackets and tow safety chains.








