Overview
The Tomken Machine TB-15 is tow bar mounting hardware for flat towing a Jeep Wrangler with all four wheels down. It is mounting hardware only and is intended for use with a universal tow bar. Flat towing is the method this hardware is made for.
Jeep’s owner’s manual warns that internal damage to the transfer case will occur if a front or rear wheel lift is used while towing. Tomken presents its tow bar system as a way to flat tow and avoid costly transfer case repair or replacement.
Key features
- Mounting hardware only, for use with a universal tow bar
- Supports flat towing with all four wheels down
- Intended to help avoid transfer case repair or replacement during towing
- Tomken states its Jeep accessories are built for rock crawling and off-roading
Choosing a flat tow setup
Flat towing keeps all four wheels on the ground and relies on the tow bar and mounting points to carry the load. Choosing a setup starts with confirming the vehicle’s year, model and trim, then matching the mounting hardware to the tow bar you plan to use. Because the hardware is meant for a universal tow bar, compatibility between the two parts should be confirmed before purchase.
Mounting points on the vehicle take most of the stress when towing, so inspect them before every trip. Look for cracks around welds, loose fasteners and bent brackets. Keep the connection points clean and lubricated so the tow bar can be attached and removed without binding.
- Match the hardware to your tow bar type
- Inspect mounting points before each trip
- Use the safety chain every time
- Re-check fasteners after early miles
Specifications
| Brand | Tomken Machine |
|---|---|
| Part number | TB-15 |
| UPC | 70000283294 |
| Type | Tow bar mounting hardware |
| Included | Mounting hardware only |
| Compatible tow bar | Universal tow bar |
Vehicle fitment
The hardware is not tied to a specific model year or chassis code. Confirm your Jeep’s year, model and trim before choosing it.
Confirm your vehicle’s year, model and trim before ordering, then check the Jeep model and year against your installation before fitting.
Installation notes
Flat towing keeps all four wheels on the ground. The owner’s manual warning about transfer case damage applies to any setup that lifts a front or rear wheel, so use only a flat tow arrangement the manufacturer allows.
What’s included
Mounting hardware only.
Not included: A tow bar. The hardware is intended for use with a universal tow bar, which is not part of this item.








