Overview
The Crown Automotive front spring plate, part number J5359012, is a passenger side plate with a shock mount stud and a sway bar mount stud. It is a factory style replacement part for 1982-86 CJ vehicles with wide track axles. Confirm your model and axle width before ordering.
Key features
- Shock mount stud and sway bar mount stud
- Factory style replacement design
- Passenger side front position
- UPC 848399064179
Checking the mount studs
Front spring plates with shock and sway bar studs carry loads from two different mounts, so the studs and their welds should be checked at every service. Look for cracks around the stud base, stripped or rounded threads and any bend in the plate that would pull the shock or sway bar out of line. Before installing, confirm the stud location lines up with the shock and sway bar brackets on your axle, and make sure the nuts seat fully. On older CJ axles, parts that were cut or modified should be checked for clearance and strength before being put back into service. When a stud is worn, replacing the entire plate is usually safer than repairing it, and the shock and sway bar hardware should be replaced at the same time if it shows wear.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5359012 |
| UPC | 848399064179 |
| Position | Front, passenger side |
| Mounting studs | Shock mount stud and sway bar mount stud |
| Design | Factory style replacement |
Vehicle fitment
Intended for 1982-86 CJ vehicles with wide track axles. Confirm fit for your CJ model, year and axle width before ordering.
Match your vehicle’s year, model and axle width to the 1982-86 CJ fitment before ordering.
Installation notes
On 1982-86 CJs with wide track axles the shock mount is not used and could be cut off. Check your axle width before making that cut.
What’s included
One passenger side front plate, with a shock mount stud and a sway bar mount stud.









