Overview
The Currie CE-9050 is a replacement shock stud, part number CE-9050, made for Currie heavy duty spring plates. Studs come with those plates where the application calls for them, and replacements are sold for damaged or broken ones.
The stud is also used in many universal shock mounting applications. Match it to your shock and mount setup before installing.
Key features
- Replacement shock stud for Currie heavy duty spring plates
- Included with the plates where applicable
- Suited to many universal shock mounting applications.
- Listed each
Shock studs and mounting
A shock stud threads into or bolts to a mount and gives the shock a fixed attachment point. It carries the shock’s movement and damping load, so a bent or loose stud can cause rattling and uneven shock action. Check the threads for damage and look for cracks where the stud meets the mount. Corrosion on the threads can also make removal difficult.
When fitting a stud, confirm it matches the shock eye or mount hole, and check that the thread length suits the plate thickness. Use the correct nuts and washers and tighten them to the level your service manual gives. Clean the threads before installation and use the lubricant suited to your hardware. Recheck the nut after the first drives, and replace the stud if it shows bending or thread damage.
- Check thread length against the plate
- Clean threads before installing
- Replace bent or cracked studs
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9050 |
| UPC | 70000281438 |
| Part type | Shock stud |
| Quantity | Each |
Vehicle fitment
It comes with Currie heavy duty plates where the application requires it. Confirm your vehicle’s year, model and trim before ordering, since the stud alone does not identify a vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock stud, listed each.








