Overview
The Rubicon Express RE2055 is a universal spring plate that is 3/8 inch thick. It is raw steel with no paint or powder coating and has three different center pin holes.
It fits U-bolts from 1/2 inch by 2.75 inches ID up to 9/16 inch by 3.25 inches ID. It is a universal fit plate, and the CJ, MJ, XJ and YJ applications are the builds it is made for, so confirm the application for your own build.
Key features
- 3/8-inch thick steel
- Three center pin holes
- Raw steel with no paint or powder coating
- Accepts U-bolts up to 9/16 inch by 3.25 inches ID
- Builder part for multiple axle applications
Choosing and checking a spring plate
A spring plate sits between the leaf spring and the axle housing. The U-bolts clamp through the plate, so it holds the spring pack in place while the axle moves over bumps and during articulation. Because the plate carries those clamping loads, it should be checked whenever the axle is removed or the spring is re-centered.
When choosing a plate, match its width and center hole pattern to the spring and axle layout you already run. Extra pin holes allow wheelbase adjustment, but only one position should be used at a time, and the unused holes should be checked for stress cracks. Confirm that the U-bolts clear the plate edges and the axle tube before tightening.
- Check the U-bolt threads and nuts for stretching
- Look for cracks around the pin holes
- Make sure the plate sits flat on the spring seat
- Re-torque clamp nuts after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2055 |
| UPC | 614901440041 |
| Thickness | 3/8 inch |
| Center pin holes | Three |
| Finish | Raw steel, no paint or powder coating |
| U-bolt range | 1/2 inch by 2.75 inches ID to 9/16 inch by 3.25 inches ID |
| Fitment | Universal fit |
Vehicle fitment
The plate is a universal fit. Its CJ, MJ, XJ and YJ applications are the vehicles it is made for. Confirm your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering, and check the U-bolt size and spring width against the plate.








