Overview
The Rubicon Express RE2621 is a high steer kit for the Jeep JK Wrangler. It brings steering angles back to factory spec on 3.5 to 5.5-inch lifted JK Wranglers.
The kit includes a heavy-duty drag link made from solid bar and an axle-mounted track bar bracket. The bracket accepts and adjusts the original OE track bar and relocates the steering stabilizer above the drag link.
Key features
- Heavy-duty drag link made of solid bar
- OE tie rod end for simple replacement
- Axle-mounted track bar relocation bracket
- Accepts and adjusts the OE track bar
- Relocates the steering stabilizer above the drag link
Steering geometry after a lift
Lifting a Jeep changes the angles of the steering components, and the drag link and track bar are the parts most affected. Without correction, the steering can feel vague, toe can change as the suspension moves, and the steering geometry can bind near full lock. A high steer setup aims to keep those angles closer to factory design.
Because the steering linkage is connected to the axle, moving the track bar or stabilizer changes how the system works through its travel. After installation, check that the steering turns freely from lock to lock and that no components contact the frame or brackets.
Steering components wear over time, especially on trail vehicles. Inspect the tie rod ends, drag link ends and bracket bolts at each service, and recheck the alignment after any change to the steering system.
- Check steering from lock to lock for binding after install
- Inspect tie rod ends and drag link ends for play
- Recheck alignment after any steering change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2621 |
| UPC | 614901099492 |
| Drag link | Solid bar, heavy-duty |
| Tie rod end | OE |
| Track bar bracket | Axle-mounted relocation |
| Lift range | 3.5 to 5.5 inches |
| Fitment | Direct fit |
Vehicle fitment
The kit is for the Jeep JK Wrangler, 2007 to 2018, on 3.5 to 5.5-inch lifted models. It is a direct fit for those vehicles.
Confirm your vehicle’s year, model and trim before ordering, and confirm your lift height is within the 3.5 to 5.5-inch range.

















