Overview
The Currie CE-9113JN is a 1-14 right hand thread jam nut, part number CE-9113JN, designed for Currie CE-9113 Johnny Joints with treaded shanks. The nut is gold zinc plated and works as a 1 inch jam nut in other applications as well. Use it to lock a joint’s length once the threads are set.
Key features
- Right hand thread in 1 inch -14 size
- Made for Currie CE-9113 Johnny Joints with treaded shanks
- Gold zinc plated finish
- Suited to other applications that call for a 1 inch jam nut
Setting length with a jam nut
Set the joint to the length you need, then run the jam nut down the threads until it meets the joint body. Hold the joint or rod end steady while tightening the nut so the length does not move. Because this nut is right hand, it tightens clockwise in the usual way, which matches most standard shanks. Avoid overtightening, which can strip the threads on the joint.
Jam nuts loosen over time from vibration, so inspect them during routine service. Clean the threads of dirt and rust before reassembly, and apply a light coat of grease where appropriate to protect the finish. Replace the nut if the threads are damaged or the zinc plating has worn off in a way that exposes bare metal. Keep spare nuts of the same thread on hand for trail repairs.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9113JN |
| UPC | 70000370005 |
| Thread size | 1 inch – 14 |
| Thread direction | Right hand |
| Finish | Gold zinc plated |
| Fitment | Universal fit |
Vehicle fitment
This jam nut is universal fit and is not tied to a specific vehicle. Its suitability depends on a matching 1-14 right hand thread on the joint, rod end or other part it threads onto.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 1-14 right hand jam nut, gold zinc plated.
Not included: the Currie CE-9113 Johnny Joint.







