Overview
The Currie CE-9113LJN is a 1-14 left hand thread jam nut, part number CE-9113LJN, made for Currie CE-9113L Johnny Joints with treaded shanks. Its silver zinc plated finish sets the nut apart in appearance. It also serves any other application that requires a 1 inch jam nut, provided the thread is left hand.
Key features
- Left hand thread in 1 inch -14 size
- Matched to Currie CE-9113L Johnny Joints with treaded shanks
- Silver zinc plated finish
- Option for other left hand 1 inch jam nut applications
Left hand thread checks
Left hand threads are easy to mistake for right hand ones once a joint is installed, so confirm direction before you start. Turn the nut onto the shank in the direction that feels natural for a left hand thread, and it should tighten as you turn it counterclockwise. A right hand nut will not start on a left hand shank without cross threading. Test engagement by hand before applying any tool.
Keep left hand parts grouped and labeled so the correct direction is clear during assembly. Mating surfaces should be clean, and any rust or paint in the threads should be cleared before fitting. Once the length is set, lock the adjustment and check it after the first drive. Replace the nut if the thread shows damage, since a worn thread will not hold its setting.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9113LJN |
| UPC | 70000453321 |
| Thread size | 1 inch – 14 |
| Thread direction | Left hand |
| Finish | Silver zinc plated |
| Fitment | Universal fit |
Vehicle fitment
Not vehicle-specific: the nut is universal fit with no year, make or model named. The left hand 1-14 thread must match the joint or rod end it goes on.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the thread runs left hand, confirm the mating part is left hand before starting, since a right hand shank will not accept this nut.
What’s included
One 1-14 left hand jam nut, silver zinc plated.
Not included: the Currie CE-9113L Johnny Joint.








