Overview
The Alloy USA 99STUD3 is a 1/2-20 press-in axle wheel stud. It is used to restore an axle or replace a broken or stripped stud and is labeled universal fit.
The stud is steel with precision machining. It has a 609 knurl diameter and 1/2-20 thread; the length is not confirmed, so measure the old stud before ordering.
Key features
- 1/2-20 press-in design
- 609 knurl diameter
- Steel construction with precision machining
- Can restore an axle or replace a broken or stripped stud
- Universal fit label
Press-in studs and hub prep
A press-in stud is pressed into a hole in the hub or axle flange, so the fit depends on the bore, the knurl and how square the stud sits while it is seated. Before pressing, clean the bore and check it for cracks, elongation or galling. A bore that has spun out will not hold a stud and should be repaired before a new stud goes in.
Pressing studs takes a suitable press or drift and steady, even force, since uneven pressure can crush the knurl or bend the shank. After seating, check that the stud stands straight and is fully supported, then install the wheel and torque the nuts. Recheck the stud and nut after the first drives, especially where a stud was replaced after damage.
- Clean and inspect the bore before pressing
- Keep the stud square during seating
- Replace studs that spin or pull loose
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 99STUD3 |
| UPC | 804314215385 |
| Type | Press-in wheel lug stud |
| Thread size | 1/2-20 |
| Knurl diameter | 609 |
| Material | Steel |
Vehicle fitment
Fit depends on the hub and axle it presses into, so match the thread and knurl size to your hub before buying. Check year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This stud presses into place rather than bolting on. Pressing needs the right tooling and steady, square force, so have a shop do it if you lack the tools.
What’s included
Quantity is one press-in lug stud. Compare the parts received with what the job needs before starting.









