Overview
The Crown Automotive J5357196 is a front wheel stud for vehicles with disc brakes. Crown Automotive makes replacement parts for Jeep vehicles, and this stud is labeled universal fit.
The stud is for the front position on vehicles with disc brakes. Its fitment points are the front position and disc brake application.
Key features
- Front position
- Disc brake application
- Replacement part from Crown Automotive
- Labeled universal fit
Stud fit and replacement
A wheel stud carries clamp load from the lug nut into the hub, so its condition matters every time the wheel comes off. Check the threads for damage, the shank for bending and the base for rust or cracking. A stud that spins in the hub or pulls loose should be replaced, along with any stud that shows thread wear.
Front studs on disc brake hubs sit close to the rotor and calipers, so keep the mounting surface clean and free of old rust before installing. Replacing studs in pairs or sets keeps load balanced across the hub. After installation, torque the lug nuts in a star pattern and recheck them once the vehicle has settled.
- Look for bent or stretched shanks
- Clean the hub face before installing
- Re-torque nuts after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5357196 |
| UPC | 848399063905 |
| Type | Wheel stud |
| Position | Front |
| Brake type | Disc brakes |
Vehicle fitment
Fit depends on the hub and brake setup, so match the stud to your hub before ordering. Check year, model and trim against your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is for front, disc brake applications. Check the brake type on your vehicle before installing it.
What’s included
The package is one wheel stud. Count the parts on hand against your installation before starting.









