Overview
The Crown Automotive throwout bearing, part J5361614, fits the 1980–1983 Jeep CJ5, the 1980–1986 Jeep CJ7, the 1980–1986 Jeep J10 and the 1981–1985 Jeep Scrambler.
The bearing is made for these engines: GM 2.5L and 4.2L 258 engines, 304 and 360 V8 engines, and the 2.1 Renault diesel. It is a clutch release part, so confirm the engine and transmission combination before ordering.
Key features
- Throwout bearing for the clutch release
- Named for GM 2.5L and 4.2L 258 engines
- Named for 304 and 360 V8 and 2.1 Renault diesel engines
- Fits CJ5, CJ7, J10 and Scrambler models
- Crown Automotive part number J5361614
Clutch release basics
A throwout bearing sits on the transmission input shaft and presses the clutch fingers when the pedal is pressed, so it wears from heat and constant contact. Worn bearings often make a squeal or growl when the clutch is depressed, and the pedal can feel rough or stiff. Before replacing it, check the clutch fork, the pivot ball and the pressure plate fingers for wear, since a worn fork will wear a new bearing quickly.
Clutch parts are usually changed together. A new throwout bearing is a good time to inspect the clutch disc, the pressure plate and the flywheel surface. Lubricate the fork pivot and the bearing contact points with a grease suited to clutch parts, and keep grease off the disc friction surface. Confirm the engine and transmission combination before ordering so the bearing matches the input shaft.
- Inspect the clutch fork and pivot
- Check the pressure plate fingers for wear
- Keep grease off the clutch disc
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5361614 |
| UPC | 848399064704 |
| Product type | Throwout bearing |
| Engines named | GM 2.5L, 4.2L 258, 304 and 360 V8, and 2.1 Renault diesel |
Vehicle fitment
It fits the 1980–1983 Jeep CJ5, the 1980–1986 Jeep CJ7, the 1980–1986 Jeep J10 and the 1981–1985 Jeep Scrambler.
Years outside those ranges and the Wrangler are not covered. Because the bearing fits several engines, confirm the engine on your vehicle as well as the year and model.
Installation notes
Confirm the transmission and the clutch linkage fit the bearing before installation, since the same bearing is named for several different engines.
What’s included
One throwout bearing.









