Overview
The Omix-ADA hydraulic clutch release bearing, part 16909.03, is built for the BA10/5 transmission. It fits the 1987–1989 Jeep Cherokee (XJ) and the 1987–1989 Jeep Wrangler (YJ).
A hydraulic release bearing is moved by fluid pressure in the clutch hydraulic system rather than by a cable. Match the BA10/5 transmission to your vehicle before buying.
Key features
- Hydraulic clutch release bearing
- For the BA10/5 transmission
- Fits 1987–1989 Cherokee XJ and Wrangler YJ models
- Omix-ADA part number 16909.03
Hydraulic clutch system care
A hydraulic release system uses fluid pressure from the master cylinder to move the slave cylinder and release bearing. Fluid that is old or contaminated can cause sticking and poor release, so inspect it whenever the bearing is changed. Look for leaks at the slave cylinder, hoses and fittings, since air or lost fluid can leave the pedal feeling soft.
When the release bearing wears, it can make noise or cause the clutch to drag. Check the pressure plate fingers and the clutch disc while the transmission is removed. Replace worn parts in the same job so the new bearing is not loaded by a damaged clutch. Keep the slave cylinder clean and avoid contaminating the bearing contact surface.
- Check fluid level and condition
- Inspect slave cylinder for leaks
- Look at pressure plate fingers and disc
- Bleed the system after the bearing change
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16909.03 |
| UPC | 804314062064 |
| Product type | Hydraulic clutch release bearing |
| Transmission | BA10/5 |
Vehicle fitment
It fits the 1987–1989 Jeep Cherokee (XJ) and the 1987–1989 Jeep Wrangler (YJ).
Years outside 1987 to 1989, and Wrangler models other than the YJ, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a hydraulic release bearing, the clutch hydraulic system will need to be bled after the bearing is changed. Check the clutch fluid level and the condition of the hydraulic line at the same time.
What’s included
The kit is a single hydraulic release bearing.









