Overview
The Centerforce throw out bearing, part N1491, is a release bearing for Jeep CJ5 and CJ7 models, J-series trucks, Cherokee (SJ), Wagoneer (SJ), the Scrambler and the Commando from 1968 to 1984.
Centerforce says its throw out bearings are made to withstand the wear that clutches see in racing, and that they are designed for reliable service race after race and for longevity on the street. The bearing presses against the clutch fingers when the pedal is pressed to release the clutch.
Key features
- Throw out bearing for the clutch release
- Built to withstand racing wear and offer street longevity.
- Fits J-series trucks, CJ5 and CJ7 models, Cherokee SJ and Wagoneer SJ.
- Centerforce part number N1491
Replacing a throw out bearing
The throw out bearing sits against the clutch fingers and moves forward each time the pedal is pressed, so it wears as clutch use adds up. A worn bearing often makes a rough or grinding noise when the pedal is pressed, and the noise may fade once the clutch is engaged. Replacing it while the clutch is apart is the time to check the disc, pressure plate and fingers for uneven wear.
Because the bearing is reached from the transmission side, the job usually includes removing the transmission. Many owners replace the clutch disc and pressure plate at the same time to avoid repeating the work. Spin the new bearing by hand to confirm it turns smoothly before installing it. Lubricate the bearing hub only as its design allows, and keep grease off the disc facing.
Specifications
| Brand | Centerforce |
|---|---|
| Part number | N1491 |
| UPC | 788442019346 |
| Product type | Throw out bearing |
Vehicle fitment
Fits the 1974–1983 Jeep Cherokee (SJ), the 1971–1983 CJ5, the 1971–1975 CJ6, the 1976–1984 CJ7, the 1972–1973 Commando, the 1973–1983 DJ5, the 1984 Grand Wagoneer (SJ), J-100 through J-4800 trucks from 1968 to 1984, the 1974–1984 J10 and J20, the 1981–1984 Scrambler and the 1968–1983 Wagoneer (SJ).
Vehicles outside these years, including the Wrangler and the Cherokee XJ, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A throw out bearing is reached from the transmission side of the clutch, so the transmission normally comes out to replace it. Check the clutch fingers for wear before fitting the new bearing.
What’s included
The package is a single throw out bearing.
















