Overview
The Centerforce N1750 is a throw out bearing for clutch release, made by Centerforce under part number N1750. Centerforce built it to handle the wear of racing clutches and to last on the street, with a direct fit design.
No make, model or year is named for this bearing, so the vehicle application must be confirmed before ordering. It is a direct fit design, meant to replace an original release bearing.
Key features
- Throw out bearing for clutch release
- Designed to withstand racing clutch wear
- Designed for long life on the street
- Marked direct fit by Centerforce
Clutch fork and pilot bearing
A throw out bearing works with the clutch fork, which pivots and pushes the bearing toward the clutch fingers. The fork and bearing share the load, so wear in one part quickly affects the other. Before fitting a new bearing, check that the fork moves freely, that its contact pads are not grooved, and that the bearing slides onto the fork without forcing.
The pilot bearing at the back of the crankshaft is the other part commonly replaced in the same job. It supports the input shaft as the clutch engages, and a worn one can cause rattling or misalignment. Lubricate the bearing contact points lightly and avoid getting grease on the disc or pressure plate.
- Check the fork pads for grooves
- Confirm the bearing slides on without forcing
- Inspect the pilot bearing for play
Specifications
| Brand | Centerforce |
|---|---|
| Part number | N1750 |
| UPC | 788442019513 |
| Type | Throw out bearing for clutch release |
Vehicle fitment
No make, model or year is named for the N1750, so fitment cannot be confirmed for any vehicle. Check your engine, transmission and clutch fork against the bearing before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the bearing seats correctly on the clutch fork before final assembly, and replace it during clutch service rather than reusing a worn unit.
What’s included
Includes one Centerforce throw out bearing.









