Overview
The Crown Automotive J0926544 is a 10 spline spider gear kit for the Dana 25 and Dana 27 front axle. It fits early Jeep models from the 1940s to the early 1970s. Spider gears are the part of the differential that lets the front wheels turn at different speeds in a corner.
The kit is identified by its spline count and by the two small Dana axles it serves. The vehicles run from the wartime Willys MB through the CJ-2 to CJ-6 and the FC trucks to the Jeepster Commando.
Crown describes itself as a maker and distributor of replacement parts for Jeep vehicles, including many factory-discontinued items, which suits this kind of vintage application.
Dana 25 and Dana 27 are small, early Jeep axle designs, so parts for them are mostly sought by owners restoring or maintaining vintage vehicles. Matching the axle model and the spline count is more important here than matching the vehicle name alone, because the same axles appear in many early models.
Key features
- Spider gear kit for Dana 25 and Dana 27 axles
- 10 spline
- Front position
- Direct fit for the listed Dana 25 and Dana 27 Jeep and Willys models.
- It fits Willys MB, CJ-2 through CJ-6, FC and Jeepster models.
Spider gears and wear
Spider gears sit on a cross pin inside the differential case and mesh with the side gears. When the vehicle turns, the outer wheel must spin faster, and the spider gears allow that difference while still driving both wheels. Wear on the spider gear teeth or the thrust washers can cause a clunk during turns, or a slip when one wheel loses grip.
Spider gears are usually checked when the differential is opened for side gear or bearing work. Matching the spline count and the Dana model is essential, since mismatched gears may seat poorly. Clean the case, check the cross pin for wear, and set the backlash before closing the housing.
- Check the cross pin for galling or wear
- Inspect thrust washers for scoring
- Confirm backlash before reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0926544 |
| UPC | 848399054804 |
| _pn | J0926544 |
| Part type | Differential spider gear kit |
| Axles | Dana 25, Dana 27 |
| Spline count | 10 spline |
| Position | Front |
| Fit type | Direct fit (Crown) |
Check the package contents against your installation before starting.
Vehicle fitment
It fits eleven classic model lines, each with its own year range, so the ranges below apply to each model.
The manufacturer fitment list for part J0926544 covers: 1959–1960, 1966 Jeep CJ3; 1959–1971 Jeep CJ5; 1959–1960, 1966–1971 Jeep CJ6; 1957–1961 Jeep FC150; 1957–1961 Jeep FC170; 1968–1971 Jeep Jeepster; 1946–1949 Jeep Willys CJ-2; 1949–1958 Jeep Willys CJ-3; 1955–1958 Jeep Willys CJ-5; 1956–1958 Jeep Willys CJ-6; 1941–1942 Willys MB.
Not listed: any Jeep newer than 1971, including the CJ7, the Wrangler and the Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the spline count and the axle before disassembly: the kit is for a 10 spline application on the Dana 25 or Dana 27 front axle.
What’s included
- Spider gear kit, J0926544 (contents not itemized)









