Overview
The Crown Automotive 68166067AA is an O-ring kit for an oil filter adapter, a seal set for the adapter rather than the adapter itself. It is not tied to a year, make, model or engine.
Crown Automotive has provided replacement parts for Jeep vehicles for many years, and it offers a catalog with discontinued items. Confirm that the O-rings match your existing adapter before fitting them, since no sizes are given.
Key features
- O-ring kit for oil filter adapters
- Crown Automotive part number 68166067AA
- Universal fit, so it is not tied to a particular vehicle.
- UPC 848399088380
O-ring replacement checks
O-rings fail through hardening, flattening and nicks, often after years of heat and oil exposure. When the adapter is opened, roll each ring between your fingers and check for flat spots or cracks. Replace any ring that looks flattened or has lost its springiness, even if it has no obvious tear.
Fit each O-ring into its groove without stretching it too far, and avoid twisting it. Lubricate the rings lightly with clean engine oil so they seat without tearing. Recheck the adapter for seepage after the next oil change, since a small leak at the seal is easy to miss when the engine is cold.
- Compare ring diameter against the old ring
- Use clean engine oil as a light lubricant
- Replace rings that are flattened or cracked
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68166067AA |
| UPC | 848399088380 |
| Product type | O-ring kit for oil filter adapter |
Vehicle fitment
It is universal fit, so no particular vehicle applies. Compatibility depends on the oil filter adapter the O-rings go into.
No vehicle is named for this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the O-rings match your existing adapter before fitting them, because no sizes or counts are given.
What’s included
An O-ring kit for the oil filter adapter. Not included: the oil filter adapter itself.









