Overview
The Crown Automotive 4720363 is an oil filter adapter seal kit for the 1993 to 2001 Jeep Cherokee (XJ) and the 1993 to 1998 Jeep Grand Cherokee (ZJ) with 4.0L 6 cylinder engines.
The kit suits those two models and years with the 4.0L 6 cylinder engine. Check the seals in your kit against the adapter before installing.
Key features
- Oil filter adapter seal kit
- Fits 1993 to 2001 Jeep Cherokee (XJ)
- Fits 1993 to 1998 Jeep Grand Cherokee (ZJ)
- Fits 4.0L 6 cylinder engines
Seal kit replacement tips
Seal kits for oil filter adapters are used when old seals leak, harden or get damaged during a filter change. Since the kit carries the seals rather than the adapter itself, the adapter should be cleaned and inspected before the new seals go in. Look for scoring, nicks or old seal material stuck to the mating surfaces.
On a 4.0L engine the adapter sits close to the block and other components, so care is needed to keep debris out of the oil passages. Lubricate new seals lightly with clean engine oil so they do not tear on installation, and seat them without twisting. Once the engine is running, check for seepage around the adapter.
- Clean mating surfaces before fitting seals
- Lubricate seals with clean engine oil
- Recheck for leaks after several heat cycles
Specifications
| Brand | Crown Automotive |
|---|---|
| Product number | 4720363 |
| UPC | 848399074994 |
| Engine application | 4.0L 6 cylinder |
| Vehicle applications | 1993 to 2001 Cherokee (XJ); 1993 to 1998 Grand Cherokee (ZJ) |
Vehicle fitment
It fits the 1993 to 2001 Jeep Cherokee (XJ) and the 1993 to 1998 Jeep Grand Cherokee (ZJ), both with 4.0L 6 cylinder engines. Only these two models are covered, even though the kit carries a universal fit designation.
The WJ generation Grand Cherokee and the Liberty (KJ) are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the kit to a 4.0L 6 cylinder engine, since no other engine is named for these models.
What’s included
An oil filter adapter seal kit. Check the seals against your adapter before installing.
