Overview
The Crown Automotive 53006085 is an NP231 transfer case input gear, part number 53006085, and a replacement gear for those transfer cases. It fits 1987-1990 Jeep Cherokee (XJ) and Wrangler (YJ) models.
Crown’s description gives no gear ratio, tooth count or material, so compare the gear with your original input gear before installing.
Key features
- Input gear for the NP231 transfer case
- It fits 1987-1990 Jeep Cherokee (XJ) and Wrangler (YJ) models.
- Identified by part number 53006085 and UPC 848399017755
- Fitment is marked as direct fit
Gear mesh and preload basics
An input gear meshes with the output gears inside the transfer case, and the contact pattern between the teeth decides how smoothly the unit runs. Bearing preload works alongside mesh, so both need to be set correctly when the gear is replaced. A gear that is slightly off in size or tooth profile can produce noise even when the parts look fine.
Wear usually shows up as a whine that changes with speed, grinding when shifting into a transfer case range, or fine metal in the fluid. When the case is open, inspect the teeth for pitting, chipping or polished spots, and check the bearings for roughness. Replacing worn bearings at the same time avoids reopening the case later.
- A whine that changes with speed
- Grinding when shifting between ranges
- Fine metal particles in the fluid
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53006085 |
| UPC | 848399017755 |
| Part type | Transfer case input gear |
| Transfer case | NP231 |
Vehicle fitment
It fits the 1987-1990 Jeep Cherokee (XJ) in Base, Chief, Laredo, Limited, Pioneer and Sport trims, and the 1987-1990 Jeep Wrangler (YJ) in Base, Islander, Laredo, S, Sahara and Sport trims.
Cherokee years outside 1987–1990 and Wrangler years outside 1987–1990 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Input gear work involves gear mesh and bearing preload, so a shop experienced with transfer cases is the usual route. Check the new gear against the original part before installing.
What’s included
Input gear, part number 53006085.
Not included: Check the package contents against your installation, including bearings, seals and gaskets, before starting.









