Overview
The Crown Automotive 5252497 is an axle gear and clutch plate kit for the Model 35 rear axle. It is a direct fit for the Jeep Cherokee (XJ), Grand Cherokee (WJ and ZJ) and Wrangler (LJ, TJ and YJ) in the years below. Model 35 is the Dana 35 rear axle used across these vehicles.
The kit contains axle gears and clutch plates for the rear differential. The gears let the two wheels turn at different speeds, and the clutch plates are friction parts. Match the part number against your rear axle diagram before buying.
Crown describes itself as a maker and distributor of replacement parts for Jeep vehicles, with over 8,000 part numbers including factory-discontinued items.
Key features
- Axle gear and clutch plate kit
- For Model 35 rear axles
- Rear position
- Direct fit
- Fits XJ, ZJ, WJ, LJ, TJ and YJ models
Rear differential rebuild basics
The differential lets the wheels on one axle turn at different speeds through a corner. Inside, the ring and pinion set transfers power, and the side gears and clutch plates control how power divides between the wheels. Friction plates help limit wheel spin when one side loses traction, so their condition has a direct effect on traction over loose ground.
Before rebuilding a Model 35, inspect the carrier bearings, pinion bearing and pinion seal along with the gears. Roughness, play or a fluid leak at the seal is a sign that the bearings need attention. Cracked or glazed clutch plates can cause chatter or weak limited-slip action.
Gear mesh and backlash must be set correctly after reassembly. A dial indicator and a clean carrier make the job more accurate, and the fluid should be the type the axle requires.
- Inspect carrier and pinion bearings for play
- Check the pinion seal for leaks
- Set gear mesh and backlash after reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5252497 |
| UPC | 848399010428 |
| _pn | 5252497 |
| Part type | Axle gear and clutch plate kit |
| Axle | Model 35 (Dana 35) |
| Position | Rear |
| Fit type | Direct fit (Crown) |
Confirm the plate count and material against your rebuild before starting.
Vehicle fitment
The Wrangler (LJ) fit is limited to the Unlimited, and each other model line fits the years shown below.
The manufacturer fitment list for part 5252497 covers: 1990–2001 Jeep Cherokee (XJ); 1999–2001 Jeep Grand Cherokee (WJ); 1993–1998 Jeep Grand Cherokee (ZJ); 2004–2006 Jeep Wrangler (LJ); 1997–2006 Jeep Wrangler (TJ); 1990–1995 Jeep Wrangler (YJ).
Not listed: Cherokee (XJ) before 1990, Grand Cherokee (WJ) before 1999 or after 2001, Wrangler (YJ) before 1990 or after 1995, and the Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit belongs inside the rear differential, so the differential carrier has to be opened to fit it. Confirm that your rear axle is a Model 35 before ordering.
What’s included
- Axle gear and clutch plate kit, 5252497 (contents not itemized)









