Overview
The Crown Automotive M20 Transfer Case Gasket and Seal Kit, part number J8130995, supplies gaskets and oil seals for the M20 transfer case. It is part of Crown Automotive’s transfer case gasket range.
Crown Automotive focuses on Jeep replacement parts. Confirm the M20 case identification before ordering.
Key features
- Includes 5 gaskets for the M20 transfer case
- Includes 2 shift rod oil seals
- Includes 2 output shaft oil seals
- Crown Automotive replacement part, part number J8130995
Gasket kit preparation
Gaskets and oil seals in a transfer case wear with heat and age, and they seep fluid when the case is worked on. Replacing all the gaskets during a case opening is common practice, since opening the case again later costs time. Inspect the mating surfaces for scoring or old gasket material, and clean them carefully before fitting new gaskets.
Seals on the shift rod and the output shaft are small but important. A worn shift rod seal can allow fluid into the shift area, while a leaking output shaft seal can drip onto the driveline. Lay the new seals beside the old ones to confirm they match before assembly. Use the fluid your transfer case calls for, and fill to the level marked for that case once it is closed up.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8130995 |
| UPC | 848399079760 |
| Transfer case | M20 |
| Gaskets | 5 |
| Shift rod oil seals | 2 |
| Output shaft oil seals | 2 |
Vehicle fitment
It is made for the M20 transfer case. Confirm fit for your vehicle’s year, model and trim before ordering, and verify your case is an M20 first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing gaskets and oil seals means opening the transfer case, so the fluid must be drained first and the seals installed with the case apart. Work with the vehicle raised and supported on jack stands, never on a jack alone.
What’s included
The kit includes 5 gaskets, 2 shift rod oil seals and 2 output shaft oil seals.
Not included: The transfer case, its fluid and any tools are needed separately.









