Overview
The Omix-ADA Dana 20 to transmission gasket, part 18603.57, is a direct OE replacement for the joint between a Dana 20 and a transmission. It fits the 1972-1979 Jeep CJ5, the 1972-1975 Jeep CJ6 and the 1976-1979 Jeep CJ7.
It is built to factory specifications and comes with a limited five year warranty. Compare the old gasket with this one before fitting, since the mating surfaces need a close look.
Key features
- Direct OE replacement for the Dana 20 to transmission joint
- It fits 1972-1979 CJ5, 1972-1975 CJ6 and 1976-1979 CJ7 models.
- Part number 18603.57 with UPC 80431401804
- Limited five year manufacturer warranty
Choosing a replacement gasket
The joint between a Dana 20 and a transmission is a sealing point where two housings bolt together, so small misalignments or old residue can cause a leak. Gaskets for this area are usually replaced whenever the transfer case or transmission is separated, because removing the bolts often damages the old material. A gasket that matches the original thickness and bolt pattern helps keep the housings seated evenly.
Before fitting, clean both surfaces down to bare metal and check for scoring or warping. Plan for fluid draining and keep the work area clean so debris does not fall into the case. When the vehicle is older, check the drive shaft yoke and nearby seals while the joint is open, since a leak at one point often has company.
- Pitted or scored housing surfaces
- Old gasket residue left on the mating faces
- Loose or uneven bolt tension at the joint
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18603.57 |
| UPC | 80431401804 |
| Transfer case | Dana 20 |
| Connection | To transmission |
| Warranty | Limited five year manufacturer warranty |
| Fitment years | 1972–1979 |
Vehicle fitment
It fits the 1972-1979 Jeep CJ5 in Base, Golden Eagle and Renegade trims, the 1972-1975 Jeep CJ6 in Base trim, and the 1976-1979 Jeep CJ7 in Base, Golden Eagle and Renegade trims.
CJ5 and CJ6 models from 1971 and earlier, along with all Wrangler models, fall outside this gasket’s year range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Clean the mating surfaces and plan for draining fluid before fitting the gasket, since this joint sits between two drivetrain parts. Check the gasket against the old one before tightening anything.
What’s included
One Dana 20 to transmission gasket, part 18603.57. Check the package contents against your installation before starting.









