Overview
The Crown Automotive replacement alternator (natural finish, part number 56028686AA) is rated at 117 amps and replaces an 81 amp alternator. It uses direct plug in wiring. It is a direct fit for the 2001–2002 Dodge Dakota and the 2001–2002 Jeep Wrangler (TJ) SE.
Crown Automotive makes replacement parts for Jeep vehicles, and this unit is a direct replacement for the vehicles named here. The 117 amp rating is higher than the 81 amp unit it replaces. Estimate your accessory demand before relying on the output rating.
Key features
- 117 amp output, replacing an 81 amp alternator
- Direct plug in wiring
- Natural finish
- Replacement alternator from Crown Automotive
- Fits 2001–2002 Dodge Dakota and Jeep Wrangler (TJ) SE models
Charging system upgrades
A higher output alternator supplies more current to accessories while the engine runs. It does not replace a healthy battery, which still has to start the engine and carry loads at idle. Before upgrading, test the battery and cable connections, because weak links can hide behind a new alternator and show up as slow charging or dim lights.
Wiring and mounting matter once the output rises. Check that the connector, harness and battery cables are in good shape and that the belt drives the alternator without slipping. Adding accessories gradually makes it easier to see how the charging system responds. Inspect the alternator belt and connections at each service interval.
- Test the battery before upgrading the alternator
- Check cable ends and grounds for corrosion
- Look for belt glazing or squeal under load
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56028686AA |
| UPC | 848399046038 |
| Output | 117 amps |
| Replaces | 81 amp alternator |
| Wiring | Direct plug in |
| Finish | Natural |
| Fit | Direct Fit |
Vehicle fitment
It fits the 2001–2002 Dodge Dakota in the Base, SLT, SXT and Sport trims, and the 2001–2002 Jeep Wrangler (TJ) in the SE trim.
Years outside 2001–2002 are not in this list, including the rest of the TJ range (1997–2006). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wiring is direct plug in, so the connector on your original alternator should line up. Disconnect the battery before swapping the unit, and check that the belt and mounting match the original setup.
What’s included
Look over the parts in the box before the install begins. The alternator is the item covered here.









