Overview
The Crown Automotive Hub Assembly, part 68141123AC, is a front hub for 4WD Jeep Cherokee models from 2014 to 2018. It fits the driver or passenger side front position and is not for vehicles with the Trailhawk package.
This front hub is made for 4WD Cherokee models in the 2014 to 2018 range.
Key features
- Front hub assembly for 4WD models
- Driver or passenger side
- Not for vehicles with the Trailhawk package
- Direct fit replacement
Hub wear and bearing checks
A front hub carries the wheel bearing and, on many 4WD models, the connection to the ABS wheel speed sensor. Wear usually appears as a growl or hum that changes with road speed, or as play felt when the wheel is rocked at the top and bottom. Because the bearing and the hub are one unit on many designs, a worn bearing often means the whole hub is replaced.
Drive engagement also matters on 4WD Cherokee models. Clicking or binding when turning, or vibration that appears only under power, can point to hub or axle issues rather than tire problems. Inspect the wheel mounting face, lug studs and the sensor wiring during any hub job, and confirm the wheel torque after the first drive.
- Check the ABS sensor wire for chafing
- Clean the hub mounting face before fitting
- Torque lug nuts after the first short drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68141123AC |
| Manufacturer number | CRO68141123AC |
| UPC | 849603019886 |
| Position | Front, driver or passenger side |
| Drive type | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
It fits 4WD 2014–2017 Jeep Cherokee (XL) and 2018 Jeep Cherokee models only. Confirm your year, model and trim before choosing this part.
Two-wheel-drive Cherokee models and vehicles with the Trailhawk package are not covered by this hub. Confirm your vehicle’s year, model and trim before choosing this part.
What’s included
One front hub assembly.









