Overview
The Crown Automotive 5252235 is a front axle wheel hub and bearing assembly for the 1987–1990 Jeep Cherokee (XJ) and the 1987–1993 Jeep Wrangler (YJ).
Crown Automotive has made replacement parts for Jeep vehicles for years, with over 8,000 part numbers, including many factory-discontinued items. This wheel hub and bearing assembly is a direct-fit replacement for the front position, with a roller bearing style hub and 2-piece composite style rotors.
A wheel hub and bearing assembly mounts the wheel to the axle and lets it turn. This hub is for the front position only, and it is not a rear application. The catalog number is CRO5252235 and the UPC is 848399010404, which helps match the part against your original hub.
Because the fit covers the 1987–1990 Cherokee (XJ) and the 1987–1993 Wrangler (YJ), a 1991 or newer Cherokee should not be assumed to fit. Compare the bolt pattern, spline count and other specifications with your original hub before installing.
Key features
- Front position wheel hub and bearing assembly
- Direct-fit replacement part
- Roller bearing style hub assembly
- Listing describes 2-piece composite style rotors
- Catalog number CRO5252235 shown by the manufacturer listing
- Fits the 1987–1990 Jeep Cherokee (XJ) and 1987–1993 Jeep Wrangler (YJ).
Checking an older hub
Hubs on older Jeeps see years of road salt, water and off-road impacts, and the bearing inside is the part that most often wears first. A worn bearing feels loose when the wheel is rocked, can make a rumble that changes with road speed, and may leave the tire wearing on one edge. Because the hub carries the wheel, a loose bearing deserves prompt attention rather than a wait for the next service.
Compare the stud length and condition with your original hub, and check the brake backing plate and rotor surfaces while the hub is off. Clean any rust from the mating faces so the new assembly seats flat against the knuckle. Lubricate nothing that the instructions for your vehicle say should stay dry, and recheck all fasteners after the first few drives.
- Rumble that changes with road speed
- Loose feel when the wheel is rocked
- Uneven wear on one edge of the tire
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5252235 |
| Catalog number | CRO5252235 |
| UPC | 848399010404 |
| Part type | Axle wheel hub and bearing assembly |
| Position | Front |
| Fit type | Direct fit |
| Hub style | Roller bearing style hub assembly |
| Rotor style | 2-piece composite style rotors |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive 5252235 wheel hub and bearing assembly covers the 1987–1990 Jeep Cherokee (XJ) in the Base, Chief, Laredo, Limited, Pioneer and Sport trims.
It also covers the 1987–1993 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, S, Sahara and Sport trims.
The list does not include Cherokee (XJ) model years after 1990, Wrangler (YJ) model years after 1993, or the Wrangler (TJ). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle, hub and driveline work is safety-critical, so professional installation is recommended. Follow your vehicle’s service procedure, tighten fasteners to the specified torque, and re-check them after the first miles of driving.
What’s included
One front wheel hub and bearing assembly. Check the package contents against your installation before starting, including the axle nut and brake components you will need.









