Overview
The Crown Automotive Front Axle Hub Assembly, part 52060398AD, is a front hub for the 2011–2018 Jeep Wrangler JK. It fits either the driver or passenger side and includes the wheel speed sensor and wheel studs, so the hub comes complete for installation.
The hub fits the 2011–2018 Jeep Wrangler JK across the trims of that generation, making it the hub for the later JK years.
Key features
- Front axle hub assembly
- Driver or passenger side
- Wheel speed sensor included
- Wheel studs included
- Direct fit replacement
Wheel speed sensor care
The wheel speed sensor reads a toothed ring at the hub and sends the signal to the anti-lock brake system and the stability controls. Because the sensor sits close to the rotating ring, it can collect metal debris and dirt, and a small amount can throw off the reading. Wipe the sensor tip clean before fitting and keep it free of grease.
Route the sensor wire away from the brake hose, the steering components and any moving suspension links so it cannot rub or stretch. A wire that is pinched or chafed can set a warning light even when the sensor itself is sound. Check the connector is fully seated and the clip holds the harness in place.
- Keep the sensor tip free of grease and debris
- Check the wire harness for chafing near the hub
- Clear any ABS warning after the wheel is back on
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060398AD |
| Manufacturer number | CRO52060398AD |
| UPC | 700007511071 |
| Position | Front, driver or passenger side |
| Included | Wheel speed sensor, wheel studs |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2018 Jeep Wrangler (JK) across the trims of that generation.
It does not fit the 2007–2010 JK or the JL generation. Check the year, model and trim against your vehicle before choosing this part.
What’s included
One front hub assembly with its wheel speed sensor and wheel studs.









