Overview
The Crown Automotive Hub Assembly, part 52098679AD, is a front hub for the Dana 30 front axle. It fits the 1999–2002 Jeep Grand Cherokee (WJ) in the front position.
Axle type is the main check before fitting this hub, since it is made for the Dana 30 front axle.
Key features
- Front hub assembly
- Dana 30 front axle
- Direct fit replacement
Hub replacement on Dana 30
A front hub carries the wheel bearings and mounts the brake rotor or drum, so its condition affects steering feel and braking. On a Dana 30 front axle, the hub works with the spindle, seals and bearings as a set. Before fitting a new hub, look at the old one for scoring, cracked flanges and bearing play, since those signs suggest other parts may need work too.
Clean the spindle and check it for wear or rust before the new hub goes on. Pack the bearings with a suitable wheel bearing grease, and install new seals to keep dirt and water out. Set the bearing adjustment carefully, because too tight or too loose both shorten bearing life. Check for smooth rotation and wheel movement once the assembly is back together.
- Scoring or rust on the spindle
- Play when the wheel is rocked
- Worn seals or leaking grease
- Rough or noisy rotation
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52098679AD |
| Manufacturer number | CRO52098679AD |
| Position | Front |
| Axle | Dana 30 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2002 Jeep Grand Cherokee (WJ).
Grand Cherokee models outside 1999 to 2002, including the later WK, are not covered. Check the year, model and trim against your vehicle before choosing this part.
What’s included
One front hub assembly.










