Overview
The Crown Automotive 52040403 is a front track bar with bushings for the 1987–1995 Jeep Wrangler (YJ). It uses rubber bushings and sits in the front position.
This front track bar keeps the axle located side to side under the Jeep. Crown Automotive makes replacement parts for Jeep vehicles, and this bar fits the YJ generation only.
Key features
- Rubber bushings
- Front position
- Fits the 1987–1995 Wrangler YJ
- Crown part number 52040403
Rubber bushings and wear
Rubber bushings in a track bar absorb small movements at each end and keep the bar quiet on the road. Over time they harden, crack or pull out of the eye, which lets the axle wander under braking and on uneven ground. A worn bushing often shows up as a knock when the steering is turned or as a faint clunk on rough roads.
When replacing the bar, look at the other front suspension parts at the same time. Tie rod ends, control arm bushings and track bar mounting bolts all take the same stress. Use a torque wrench to set the bolts to the value the vehicle requires, and recheck them after the first few trips. Keep the bolts clean and free of grease so the torque reads accurately. A front alignment after the job keeps the tires wearing evenly.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52040403 |
| UPC | 848399015041 |
| Position | Front |
| Bushing material | Rubber |
| Included | Front track bar with bushings |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ), including the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Later Wrangler generations such as the TJ (1997–2006) are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front track bar with bushings. Check the package contents against your installation before starting.










